• Lubrication-Pump-DDB10
  • Lubrication-Pump-DDB10 - Caidéal Ilphointe
  • Lubrication-Pump-DDB10-Grease-Instection-Pump

Caidéal Lubrication Ilphointe DDB-10

Mír #: 3077
Max. Brú Oibre: : 100Bar
Mótar Leictreach: 380VAC, 0.37kW, 50 / 60Hz
Umar Fás: 7L
Meáchan: 38Kgs
Úsáid: Caidéal lubrication Ilphointe le haghaidh suas le calafoirt beatha 10 ramhar
gnéithe:
- 1 ~ 10 Calafort bealaithe atá ar fáil
- Umar saill suas go dtí 7L, 0.37Kw, 380V mótar leictreach
- Toisí suiteála caighdeánach agus saol seirbhíse níos faide
Táirge / Athsholáthar Gaolmhar: Pump Injector
Sonraí Teicniúla Pump Pump: Pump PDF DDB

  • Tuairisc
  • toisí

Tuairisc

Caidéal Lubrication DDB-10

Caidéal bealaithe Is caidéal insteallta ramhar ilphointe le DDB-10 le calafoirt asraon beathaithe ramhar 10, atá ar fáil le haghaidh córas lubrication lárnach ramhar i dtrealamh beag, aonair nó forásach. Is é beartú instealladh loine le caidéil lubrication a thógáil le calafoirt ramhar 10 (Nó lú, is féidir é a shéaladh mura bhfuil gá le roinnt calafoirt i láthair na huaire), de ghnáth bíonn an caidéal lubrication seo ceangailte le rannpháirtithe bloc chun freastal ar riachtanais éagsúla lubrication.

Tá an suiteáil caidéil lubrication DDB-10 go leor éasca, ach ag nascadh gach insteallta caidéil le píopaí cruach nó plaisteach le cónascaire, agus dáileadh gach bealach beathaithe ramhar chun pointí éagsúla riachtanacha lubrication, socródh seamanna nó strapaí na feadáin iompair ramhar. Tá an caidéal DDB-10 ar fáil ar mhaithe le greim níos lú ná 265 (25, 150g) 1 / 10mm ram (NLGI0 # ~ 2 #), is é an teocht atá molta an t-imthimpeallacht oibriúcháin níos fearr a choinneáil idir 0 ~ 40.

It is necessary to clean the injector of lubrication pump and inlet port of grease lubrication system before filling grease in the grease reservoir, following the procedures to fill grease in DDB-10 pump and test the motor rotation of lubrication pump and each junction points after the completion of connection between lubrication pump and lubrication system or divider valves. The DDB-10 pump has been proved that multi-point lubrication pump can improve the work efficiency 5-time above if comparing with conventional lubrication methods, saving 2/3 lubricants, reduce maintenance costs about three times, extending service life of wear-out parts, the lubrication pump has characteristics of simple construct, easy to operate and installation, safe working, clean and other characteristics of lubricating oil and no special requirements for routine lubrication maintenance provides an effective way to work , but also for the efficient, fast, energy-efficient and safe for production and construction environment.

Cur síos ar an gcaidéal lubrication ramhar:

Grease-Lubrication-Pump-DDB18-thógáil
Liosta na gCuid Pumpála Bealaidh:

1. Mótarfheithicil; 2. Worm Isteach; 3. Seafta worm Gear; 4-5-6. Gears; 7. Seafta Eccentric; 8. Pincheangal; 9. Diosca tiomáinte; Loine 10.Inner; 11. Pláta tiomáinte ramhar; 12. Sreabhadh sreabhadh ag sreabhadh


Pump Lubrication DDB-10 Sonraí Teicniúla:

Max. BrúPointí BeathaStróc LoineStroke AdjustableImleabhar Beathú
10Mpa1010mm5mm0-0.2 ml / am
Beathú AmImleabhar umarMótarmeáchan
13 am / min7L0.37Kw, 1380r / min, 380V38Kgs 1232


Pump Lubrication Toisí DDB-10:

Lubrication-Pump-DDB-10-toisí

Note Of Grease Pump DDB-10 Before Operation:

  1. The multi-point lubrication grease pump DDB-10 should be installed in a place where the ambient temperature is suitable for working operation and small dust, which is convenient for oil or grease filling, adjustment, inspection and maintenance.
  2. The HL-20 gear oil must be added to the gear box to the oil level specified level.
  3. To add grease to pump reservoir the of the DDB-10 grease pump, the SJB-D60 manual fuel pump or the DJB-200 electric grease filling pump must be used to fill the grease to the pump reservoir of the DDB-10 grease pump. It is strictly forbidden to start the motor when there is no grease or oil in the reservoir.
  4. According to the arrow direction of rotation on the cover of the electric motor, the motor should be connected with stable wire and not reversed.
  5. The accuracy of the filter screen is not less than 0.2mm and should be cleaned regularly.
  6. The grease pump DDB-10 should be kept clean at all times. It is strictly forbidden to remove the reservoir cover, to prevent dirt from entering the pump chamber and affecting normal work.
Pump Lubrication Toisí DDB-10:Lubrication-Pump-DDB-10-toisí
earráid:
GTranslate Your license is inactive or expired, please subscribe again!